The Aspire ET-S BDC (bottom dual coil) eGo clearomizer types has been revolutionized with a new heating element coil design. The ET-S BDC tank is reinforced with a Pyrex glass material and holds approximately 2.4ml of liquid capacity. The tank can be disassembled into four total parts for easy cleaning and maintenance. Stock Coil heads feature a 1.8ohm resistance, and can be easily replaced by unscrewing the bottom end cap. Features: No burning No leaking Easy refill Huge vapor Pure and clean taste Stable and reliable eGo base 2.4ml capacity How to Use your Aspire BDC: -To fill, turn the tank upside down and remove the threaded end cap. Fill the outer portion of the tank (avoid getting e-liquid into the center airflow tube) and then screw the end cap back onto the tank tightly. You can now turn it rightside up and check for leaks before using. -Gurgling or Leaking can occur if liquid gets into the center airflow tube. To clear this liquid and improve performance remove the tank from the battery and blow through the mouthpiece into a paper towel. The excess liquid will come out of the threaded end of the device. If this happens often you may need to check that all connections are screwed down tightly or replace the head and wick assembly with a new one. -The head and wick assembly will sometimes loosen itself when the threaed end cap is unscrewed. Always check that it is pushed into the bottom cap tightly tightly before screwing the cap back on. Not doing so could result in a leaking or non-working device. -You should never run the tank completely dry. Doing so could result in a burnt or damaged wick and can cause leaking. Refill the tank when the liquid level reaches approximately 1/3 full -The lifespan of replacement heads can vary quite a bit, but following the above instructions will maximize the lifespan of the coil.
The coils for the Aspire ET-S can be found here: Aspire BVC Coils
I used the I-Clear Atomizer a long time until Steven introduced me to the Aspire ET-S Tank. I wish he had told me about the Aspire ET-S much sooner. The Aspire ET-S has a much better air flow, therefore the liquid burns better, giving you a better taste.
I have not used the Aspire ET-S Tank yet. I am currently using the Aspire Steve sent me.
I have been using the I-Clear Atomizer for years. The Aspire is much nicer. The air flow is much smoother and the Aspire burns the liquid much better giving you a better taste.